Skip to content
Recall Observatory FDA recall evidence

Device product

5.0mm Unit Rod 270mm 5.0mm Unit Rod 290mm 5.0mm Unit Rod 310mm 5.0mm Unit Rod 330mm 5.0mm Unit Rod 350mm 5.0mm Unit Rod 370mm 5.0mm Unit Rod 390mm 5.0mm Unit Rod 410mm 5.0mm Unit Rod 430mm 5.0mm Unit Rod 450mm pedicle screw spinal system; Intended to provide immobilization and stabilization of spinal segments in skeletally mature patients.

Z-1935-2013

June 05, 2013

Class II

Product summary

Firm
Synthes USA HQ, Inc.
Event
Event 65563
Status
Terminated
Classification
Class II
Quantity
492
Official record key
device-enforcement:Z-1935-2013

Official wording

Reason: DePuy Synthes has issued a Medical Device Correction notice for the 5.0mm Stainless Steel rods. This product was produced using a finishing process not identified as part of the manufacturing specification. No adverse event reports associated with the use of this product were received, and an extensive engineering and medical safety review concluded that the product poses no incremental risk to t

Code information: Part Numbers: 298.269 298.270 298.271 298.272 298.273 298.274 298.275 298.276 298.277 298.278 with lot numbers: 4729951; 4841209; 4923651; 4923652; 4987688; 4987750; 5350635; 2002330; 3000595 4729952; 4841210; 4923653; 4923654; 4987683; 4856248; 4987755; 5153848; 5153853; 1602596; 1880489 4729953; 4841211; 4923666; 4923667; 4987778; 4856275; 4987761; 5159826; 5157329; 3016224 4729954; 4841212; 4919162; 4923669; 4987779; 4856250; 4987766; 5153796; 3093619 4729956; 4923674; 4987825; 4987780; 5066363 4729958; 4923615; 4987826; 4987781; 5066364 4729959; 4841213; 4923655; 4936270; 4987684; 4987771; 5153849; 5153854 4729960; 4835367; 4923656; 4923657; 4984982; 4856246; 4987772; 5159827; 5157330 4729961; 4835368; 4923658; 4923659; 4987685; 4856249; 4987773; 1602617; 3080451 4729962; 4835378; 4919165; 4923660; 4987686; 4856252; 4987776; 5153851

Distribution pattern: Nationwide Distribution.

Derived failure modes

  • Unknown

    reason.no_named_rule · v1.0.0

    DePuy Synthes has issued a Medical Device Correction notice for the 5.0mm Stainless Steel rods. This product was produced using a finishing process not identified as part of the manufacturing specification. No adverse event reports associated with the use of this product were received, and an extensive engineering and medical safety review concluded that the product poses no incremental risk to t